Overview

Hammerite Hammered Direct To Rust Metal Paint, comes in a handy aerosol spray can for easy application. It’s specially formulated to perform as a primer, undercoat and topcoat in one. This product can be applied directly to rust and dries quickly to a subtle hammered effect with a metallic sheen.

Hammerite hammered finish spray paint comes in Black, White and Silver and can be used directly on to metal doors, garden furniture, gates and railings.

• Hammered effect with a metallic sheen
• Up to 8 years rust protection
• Ultra tough - excellent weather resistance
• Smooth glossy finish

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Remove any loose paint and debris with a wire brush.
• Remove dirt and dust with diluted detergent.
• Remove grease with , then rinse with clean water and allow to dry.
• On bare zinc, aluminium and galvanised surfaces, firstly apply .

Application

Before applying Hammerite Hammered Direct To Rust Metal Paint - Aerosol test a small area to ensure you are happy with the colour and finish.

• Spray a test patch of Hammerite Direct to Rust Metal Paint onto painted surfaces and leave for 1 hour.
• If there is no reaction apply Hammerite Direct to Rust Metal Paint directly to surface.
• If there is a reaction remove all paint before applying Hammerite Direct to Rust Metal Paint.
• For best results store the aerosol at room temperature for two hours prior to use.
• Shake can vigorously in a vertical motion, until the agitator ball is heard and continue to shake for a further 3 minutes.
• Spray in light even strokes from a distance of 15cm to avoid runs.
• Do not concentrate spray on one spot.
• Apply at least 3-4 coats for maximum protection.
• Allow 15 minutes between coats .
• Between coats invert can and spray for 2 seconds to avoid blockages.
• Touch dry 15 minutes, recoat after 15 minutes.

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage